SAVE £592



Fuel Type: Wood

Nominal Output: 5 KW

Modern cylindrical design

10 Year ACR Warranty

Product enquiry

Please send us a message by filling out the form below and we will get back with you shortly.

Checkboxes *


ACR NEO 3P ECO Wood-burning Stove.

With its striking pedestal base design the ACR NEO 3P ECO is everything you would expect from a fully featured contemporary stove, creating a real sense of occasion in any room. The large glass door sits in a cylindrical body and is kept clean by a powerful airwash system which also ensures an efficient burn is achieved. The NEO 3P ECO is glazed on three sides to give a more panoramic view of the fire, though a steel sided option is also available. The NEO 3P ECO benefits from being DEFRA exempt allowing you to burn wood in smoke controlled areas.

As with all NEO stoves in the range, the ashpan slides towards you to enable the lid to be fitted and then lifted out to allow clean and safe disposal of its contents. The optional direct air supply kit is available, making this stove ideal for new build installations. When installed with the optional rear heat shield, the clearances can be significantly reduced – please refer to the manual for this information.(Source ACR Brochure). In total 6 design options are available across the NEO range.

  • Fuel: Wood
  • Output: Nominal 5Kw
  • Energy Rating: A
  • Flue Options: Top or Rear
  • Chimney can be swept through the stove
  • DEFRA exempt
  • Construction: Cast Iron & Steel
  • Airwash: Yes
  • Approved for Smoke-Free Zone: Yes
  • Efficiency: 79.4%

Optional Extras

  • Black Glass Top Plate (Specify Top or Rear Flue) (+£155)
  • Direct Air Kit options: 80mm (+£115); 100mm (+£67)
  • Heat Shield (+£215)

ACR NEO 3C with a cupboard base and NEO 3F with short feet also available. Neo 1P, 1C and 1F models with steel sides also available.

Additional information



Fuel Type



W490mm x H1055mm x D390mm



Flue Size

125mm (5")

Distance to Non-Combustibles

Side 150mm: Rear 50mm: Above 300mm

Distance to Combustibles

Side 500mm: Rear 50mm: Above 375mm

Product enquiry


Installation of domestic solid fuel, oil or gas appliances must be certified by a competent engineer. A HETAS, OFTEC or GAS SAFE Engineer is recommended or equivalent governing body. Building Regulations approval is also possible when work is carried out by a competent person.

Click here to find out more about our Installation Service, available for customers located in the South West.

You may also like…